Packard Bell EasyNote SW Series Disassembly Manual page 13

Fig. 15
11. Remove the lower supporting bracket.
12. Take away the LCD display panel and inverter board.
13. Disconnect the LCD cable from the inverter board.
14. Disconnect the LCD cable from the back of the LCD display panel.
Fig. 16
15. Remove the screws (3x D, 1xA) from the left LCD bracket. The same goes for
the right bracket.
Fig. 17
16. Take away the top, left and right bracket from the LCD display panel.
17. Remove the screws (2xD) holding the wireless antenna and take away the
antenna.
LCD inverter backlight connecter.
LCD display cable.
LCD display cable.
11