Disassembling The Lcd Panel Assembly - Packard Bell EasyNote SW Series Disassembly Manual

Disassembling the LCD Panel Assembly

To disassemble the LCD panel, follow the steps below:
1. Remove the screw covers and screws (2xG).
2. Remove the screw covers and screws (4xH).
3. Unclip the front bezel by pushing it outwards from the inside
4. Take away the bezel.
5. Remove the screws (2xH) at the top (see Fig. 14).
6. Remove the screws (3xD) from the top supporting bracket.
7. Remove the screws (4xJ) from the hinges.
8. Remove the screws (2xD) from the lower supporting bracket.
9. Remove the screws (2xD) from the inverter board.
10. Disconnect the inverter backlight connector.
Fig. 13
LCD panel front bezel.
Fig. 14
LCD display panel.
10