Lifting Procedure - Trane RTAA-70 Installation & Maintenance Manual

RTAA-SVX01A-EN
Installation — Mechanical

Lifting Procedure

CAUTION
Equipment Damage!
To prevent damage do not use a forklift to lift or push the unit.
Position lifting beam so that cables do not contact the unit.
• Install chains and safety chains through the six lifting plates provided on
the unit.
• Attach lifting chains or cables to the chains installed above. Each cable
alone must be strong enough to lift the chiller.
• Attach cables to lifting beam. Total lifting weight, lifting weight distribution
and required lifting beam dimensions are shown in
and on the rigging diagram shipped with each unit. Lifting beam cross-
bars must be positioned so lifting cables do not contact the sides of the
unit.
Figure 4 and Figure 5
17