Electrically operated roof
Plastic cover for temporary
covering
If the roof cannot be closed due to low
battery voltage or a possible roof fault then a
protective plastic cover can be fitted. The
plastic cover is fitted with the rope attach-
ments inward.
The plastic is stored in a bag marked "Cover
for temporary use".
• For cars that are equipped with
emergency puncture repair the plastic
cover is located in the ski hatch.
• For cars that are equipped with spare
wheel the plastic cover is located in the
spare wheel bag, see page 140.
Plastic cover, located in the ski hatch.
– Raise the windows (if possible).
– Take the plastic cover from the centre
panel in the rear seat backrest at the ski
hatch.
– Take the plastic cover from the package
and unwrap it.
– Thread the hole (3) over the door mirror
and secure the hooks (2) in the front
wheel arches.
– Clamp the plastic cover between the
wiper blades and the windscreen and
stretch the plastic so that it has one
tuck (1) per wiper blade.
– Guide through the antenna (5).
– Secure the hooks (4) in the rear wheel
arches and the hooks (6) under the rear
bumper.
Interior
77