Volvo C70 Owner's Manual page 147

Wheels and tyres
Emergency puncture repair
Changing the sealing fluid
canister
The canister of sealing fluid should be
changed before the best-before date has
expired, see date label (1), or after the tyre
has been sealed. After use, the canister (6)
with holder (8) and air hose (10) should be
changed.
This change can be carried out by an
authorised Volvo workshop or following the
instructions.
IMPORTANT!
Read the safety instructions on the
bottom of the canister.
146
WARNING!
Ensure the compressor is not connected
to the 12 V socket when the canister is
changed.
Changing the canister before the
best-before date has expired
– Undo the two screws (2) on the orange-
coloured case (3).
– Remove the speed label (4) and date
label (1), and open the safety catch (5).
Loosen the case (3) and take it off.
– Unscrew and remove the canister (6).
– Check that the seal (7) on the new
canister is not damaged. Screw the
canister into place.
– Refit the case (3). Check that the case is
correctly fitted. Screw it on with the
screws (2).
– Affix the speed label (4) and new date
label (1) to the tyre repair kit.
Treat the removed canister as hazardous
waste.
Changing the canister and hose
after use
– Undo the two screws (2) on the orange-
coloured case (3).