Making And Receiving Calls - Volvo C70 Owner's Manual

Telephone functions (option)
On/Off
A handset appears on the display when the
telephone system is active or in standby
mode. If the ignition key is turned to
position 0 when the telephone is in one of
these modes, the telephone automatically
resumes this mode the next time the key is
turned to position I or II.
Activating the telephone system
Telephone system functions can only be
used when the telephone is in active mode.
– Press PHONE.
– Enter the PIN code (if necessary) and
press ENTER.
Deactivating the telephone system
No calls can be received when the telephone
is deactivated.
– Hold PHONE depressed until the
telephone is deactivated.
Standby
In standby mode, the audio system can be in
use while calls are received. However, it is
not possible to make calls when in standby
mode.
Putting the telephone in standby mode
The telephone must first be in active mode
before it can be put in standby mode.
– Press EXIT.
Activating from standby mode
– Press PHONE.

Making and receiving calls

If the privacy handset is raised when a phone
call is started, the sound will come from the
handsfree system. For information on
switching between privacy handset and
handsfree during a call, see page 197.
To call
– Activate the telephone system (if
necessary).
– Dial the number or use the phone book;
see page 197.
– Press ENTER or lift the handset. Release
the handset by pressing it down.
Receiving a call
For Auto answer, see menu option 4.3,
page 200.
– Press ENTER or lift the handset. Release
the handset by pressing it down.
Ending a call
– Press EXIT or hang up the handset.
Refusing a call
– Press EXIT.
Call waiting
A two-tone signal during a telephone call
indicates that there is another incoming call.
Answer? appears on the display. The call can
be refused or taken in the normal manner. If
Infotainment system
the incoming call is taken, the previous call is
put on hold.
Putting a call on hold/resuming a call
– Press MENU.
– Scroll to Hold or Hold off and press
ENTER.
Dialling a third party
– Put the call on hold.
– Dial the number of the third party.
Switching between calls
– Press MENU.
– Scroll to Swap and press ENTER.
Starting a conference call
A conference call consists of at least three
parties that can talk to one another. Once a
conference call has been initiated, no more
parties can be connected. All calls are ended
when the conference call is ended.
– Press MENU.
– Scroll to Join and press ENTER.
195