Starting and driving
Towing and recovery
Towing eye
Use the towing eye if the car needs to be
towed on the road. The towing eye is
attached in the recess on the right-hand side
of the front or rear bumper. To fit the towing
eye:
– Take the towing eye which is located in
the bag in the ski hatch or together with
the spare wheel.
– Release the bottom edge of the cover on
the bumper with a screwdriver or coin 1.
120
– Screw in the towing eye firmly, right up to
the flange, 2 and 3.
– After use, unscrew the towing eye and
insert it into the bag which is then fitted in
the ski hatch or together with the spare
wheel. Refit the cover on the bumper. The
car must always be towed with the
wheels rolling forward.
IMPORTANT!
The towing eye is only designed for
towing on roads, not for pulling the car
unstuck or out of a ditch. Call a recovery
service for assistance.