Home Safe Lighting; Direction Indicators - Volvo C70 Owner's Manual

Left-hand stalk switch
Stalk switch positions
1. Short flash sequence, direction
indicators.
2. Continuous flash, direction indicators.
3. Main beam flash.
4. Switching, main and dipped beam, and

home safe lighting.

Direction indicators

Continuous flash sequence
– Move the stalk switch up or down to end
position (2).
The stalk switch remains in its end position
and is moved back manually, or automatically
by steering wheel movement.
Short flash sequence
– Move the stalk switch up or down to
position (1) and release.
The direction indicators flash three times and
the stalk switch returns to its home position.
Switching, main and dipped
beam
The ignition key must be in position II for main
beam to be switched on.
– Turn the headlamp control clockwise to
the end position, see page 46.
– Move the stalk switch towards the
steering wheel to the end position (4) and
release.
Main beam flash
– Move the stalk switch gently towards the
steering wheel to position (3).
Main beam comes on until the stalk switch is
released.
Home safe lighting
Some exterior lights can be kept lit and serve
as home safe lighting after the car is locked.
The standard delay is 30 seconds
be changed to 60 or 90 seconds; see
page 59.
– Remove the key from the ignition switch.
1. Factory settings.
– Move the stalk switch towards the
steering wheel to the end position (4) and
release.
– Get out of the car and lock the door.
1
, but can
Instruments and controls
47