VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall below the defined threshold.
Percentage = 30%
If you want to configure other motion detection settings for day/night/schedule mode, please click Profile
to open the Motion Detection Profile Settings page as shown below� A total of three motion detection
windows can be configured on this page as well.
2011/03/21 17:08:56
Please follow the steps beolw to set up a profile:
1� Create a new motion detection window�
2� Check Enable this profile�
3. Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a time
range if you choose Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event settings page� You can go to Event >
Event settings > Trigger to choose it as a trigger source� Please refer to page 85 for detailed information�
98 - User's Manual