Table of Contents
Advertisement
interger>
Return Code
400 Bad Request
415 Unsupported Media Type
8. 24 Open Anystream (capability.nanystream > 0)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value>&
mjpeg_qvalue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<value>
&mpeg4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bitrate=
<value>&mpeg4_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>&
h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>&
h264_bitrate=<value>& h264_maxframe=<value>]
<product dependent>
PARAMETER
codectype
solution
mjpeg_quant
mjpeg_qvalue
least.
(Used by forcechk)
Description
Request is rejected because some parameter values are illegal.
Returned, if forcechk appears, when minsft is not achievable or the
timeshift feature of the target stream is not enabled.
VALUE
mjpeg, mpeg4, h264
<product dependent>
capability_videoin_resolution <product
0, 1~5
99, 1~5
<product dependent>
10~200
DEFAULT
DESCRIPTION
N/A
Set codec type for Anystream.
Video resolution in pixels.
dependent>
3
Quality of JPEG video.
0,99 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
<product dependent>
50
Manual video quality level input.
VIVOTEK
User's Manual - 189
Advertisement
Table of Contents
