Table of Contents
Advertisement
Port
HTTPS port: By default, the HTTPS port is set to 443. It can also be assigned to another port number
between 1025 and 65535�
Two way audio port: By default, the two way audio port is set to 5060. Also, it can also be assigned to
another port number between 1025 and 65535�
The Network Camera supports two way audio communication so that operators can transmit and receive
audio simultaneously� By using the Network Camera's built-in or external microphone and an external
speaker, you can communicate with people around the Network Camera�
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio
function, make sure the video mode is set to "MPEG-4" or "H.264" on the Media > Video > Stream
settings page and the media option is set to "Media > Video > Stream settings" on the Client Settings
page� Please refer to Client Settings on page 26 and Stream settings on page 78�
Audio is being transmitted to the Network Camera
Video (TCP-AV)
IMPORTANT!
The network camera does not come with an embedded microphone� An externally connected
microphone is necessary, and hence the default audio is mute� If your connect a microphone, you
should deselect the audio mute checkbox in Media -> Audio setting page�
Click
to enable audio transmission to the Network Camera; click
microphone; click
to turn off the audio� To stop talking, click
FTP port: The FTP server allows the user to save recorded video clips. You can utilize VIVOTEK's
Installation Wizard 2 to upgrade the firmware via FTP server. By default, the FTP port is set to 21. It also
can be assigned to another port number between 1025 and 65535�
Talk Button
Mic Volume
2011/03/09 17:08:56
Mute
to adjust the volume of
again�
VIVOTEK
User's Manual - 57
Advertisement
Table of Contents
