Table of Contents
Advertisement
VIVOTEK
3� When all settings are complete, move the Network Camera to the protected LAN by connecting it to an
802�1x enabled switch� The devices will then start the authentication automatically�
NOTE:
► Below is the authentication process for 802.1x:
1� The Certificate Authority (CA) provides the required signed certificates to the Network
Camera (the supplicant) and the RADIUS Server (the authentication server)�
2� A Network Camera requests access to the protected LAN using 802�1X via a switch (the
authenticator). The client offers its identity and client certificate, which is then forwarded
by the switch to the RADIUS Server, which uses an algorithm to authenticate the Network
Camera and returns an acceptance or rejection back to the switch�
3. The switch also forwards the RADIUS Server's certificate to the Network Camera.
4� Assuming all certificates are validated, the switch then changes the Network Camera's state
to authorized and is allowed access to the protected network via a pre-configured port.
VIVOTEK
Network Camera
50 - User's Manual
Certificate Authority
(CA)
1
Certificate
2
Network Switch
1
Certificate
4
RADIUS Server
3
Protected LAN
Advertisement
Table of Contents
