VIVOTEK
■ Sharpness: Adjust the image sharpness level, which ranges from -3 to +3� You can also select
Customize and manually enter a value�
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Profile Settings page as shown below.
Please follow the steps below to setup a profile:
1� Check Enable and apply this profile�
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of
time if you choose the Schedule mode�
3. Configure the settings in the following columns.
4� Click Save to enable the settings and click Close to exit the page�
70 - User's Manual