Table of Contents
Advertisement
Misc� settings:
1� PTZ control pannel operation mode: Continuous move - click and hold down the left mouse button
on the PTZ panel, and the live view will continuously move toward the preferred direction until you
let go of the mouse button� The Click to move option allows you to move live view window one
step by each single click�
2� Start to pan/patrol/return to home position: Use the checkbox and the pull-down menus for the
camera to automatically pan, patrol, or return to the home position after the camera has stayed
idle for a period of time�
Positions on the Home page
The Preset positions will also be displayed on the home page� Select one from the Go to drop-down
list, and the Network Camera will move to the selected preset position�
Patrol button: Click this button, then the Network Camera will patrol continuously among the selected
positions�
Patrol button
PTZ > Calibrate
This function re-calibrates the home position to the default center to recover any displacement caused by
external forces. Please note that there is no confirm message after using the function, and the calibration
immediately takes place. If, after a long use, a user finds it is difficult to move camera's field of view to a
specific point, use this function to restore the camera's original coordinates in pan and tilt motions.
VIVOTEK
2010/12/10 17:08:56
User's Manual - 83
Advertisement
Table of Contents
