Table of Contents
Advertisement
General Connection (without PoE)
1� If you have external devices such as sensors and
alarms, connect them to the general I/O terminal
block�
GND: Ground
DO2: Digital Output 2
GND
DO1: Digital Output 1
DO2-
DO1-
DO+
DO+: Digital Outupt (DC12V)
GND
GND: Ground
DI3
DI2
DI3: Digital Input 3
DI1
DI2: Digital Input 2
DI1: Digital Input 1
Power over Ethernet (PoE)
When using a non-PoE switch
Use a PoE Plus power injector to connect between the Network Camera and a non-
PoE switch�
2� Use the supplied RJ45 female/female coupler
to connect the Network Camera to a switch�
Use Category 5 Cross Cable when Network
Camera is directly connected to a PC�
(AC 24V 3�5A) Power Adapter
3� Connect the power cable from the
Network Camera to a power outlet�
IMPORTANT!
1� The camera is only to be connected to PoE
networks without routing to outside plants�
2� For PoE connection, use only UL listed I�T�E� with
PoE output�
PoE Plus Power Injector
VIVOTEK
Non-PoE Switch
User's Manual - 9
Advertisement
Table of Contents
