Loading Backup Data From A Cd-R/Rw Drive - Fostex VF80EX Owner's Manual

Loading backup data from a CD-R/RW drive

The following description is assumed that you have a CD-RW/CD-R disc which contains saved data.
<Note>
Do not carry out any VF80EX key operation until
the access process to the CD-RW/CD-R disc is com-
pleted.
After turning on the VF80EX, insert the disc to the
1
CD-R/RW drive.
<Note>
If you load song data which is saved to more
than one disc, set DISC-1 first.
If you set the other disc and go on the follow-
ing procedure, the VF80EX automatically rec-
ognized that the disc order i s not correct and
the display shows "Wrong Disk" , followed by
"Illegal No!" momentarily, and the disc is au-
tomatically ejected.
Press the [SETUP] key to enter the setup mode.
2
The display shows the screen for selecting the setup
menu.
Use the [JOG] dial to select (highlight) "Load PGM"
3
and press the [ENTER/YES] key.
The display shows the screen for selecting a load de-
vice, where "IDE" is flashing.
Save/Load of Song data (VF80EX)
While "IDE" is flashing, press the [ENTER/YES] key.
4
After briefly showing the model name of the connected
CD-R/RW drive, the display shows the screen for se-
lecting a load mode, where "BkUp" (backup) is flash-
ing.
To load song data saved, select "BkUp".
To load a material from an audio CD, select "CD-DA".
This procedure describes how to load song data, so
we select "BkUp" here.
See "Loading from an audio CD" described later for de-
tails about how to load a material from an audio CD.
Flashing
While "BkUp" is flashing, press the [ENTER/YES] key.
5
The display shows the backup number and title, as
well as recorded space.
Flashing
By rotating the [JOG] dial, you can select a desired
program number/title from among available programs
in the VF80 current drive. You can also select "Eject".
If you select "Eject" and press the [ENTER/YES] key,
the disc is ejected
When you load song data which is saved to more
than one disc, the display also shows the disc num-
ber currently set. The example below shows DISC-
1 is set.
Flashing
Light up
Flashing
While the desired backup number/title is shown on
6
the display, press the [ENTER/YES] key.
The display shows the screen for creating a new pro-
gram on the current drive, to which data will be loaded
("New PGM" lights).
117