Fostex VF80EX Owner's Manual page 51

Chorus effect parameters (parameter type: CHORUS)
For effect type 35 of the preceding "Effect type" table, the following five parameters can be adjusted.
1. Eff Level
2. Depth
3. Double Time
4. Double Lvl
5. Filter
Flanger effect parameters (parameter type: FLANGE)
For effect type 36 of the preceding "Effect type" table, the following five parameters can be adjusted.
1. Eff Level
2. Rate
3. Depth
4. Mod Delay
5. Feedback
Mono pitch effect parameters (parameter type: MONO PITCH)
For effect type 37 of the preceding "Effect type" table, the following four parameters can be adjusted.
1. Eff Level
2. Pitch
3. Adjust
4. Mode
Delay pitch effect parameters (parameter type: DELAY PITCH)
For effect type 38 of the preceding "Effect type" table, the following five parameters can be adjusted.
1. Eff Level Adjust the effect return level: 0~99
2. Pitct Adjust the amount of pitch shift. Range: -24--0--+24
* +/-12 is one octave. +/-24 is two octaves.
3. Adjust Make fine adjustments to the amount of pitch shift. Range: -50--0--+50
* +50 is a semitone sharp. -50 is a semitone flat.
4. Delay Time Adjust the delay time until the pitch-shifted sound is heard. Range: 0--500 ms
5. Feedback Adjust the number of delay repeats. Range: 0--99
Adjust the effect return level: 0~99
Adjust the chorus depth. Range: 0--99
Adjust the time difference of the doubling effect. Range: 0--99
Adjust the volume of the doubling effect. Range: 0--99
Adjust the tone of the delay sound. Range: L9~L1, OFF, H1~H9
* L1~L9 = LPF (larger numbers will lower the cutoff frequency)
* H1~H9 = HPF (larger numbers will raise the cutoff frequency)
Adjust the effect return level: 0~99
Adjust the speed of modulation. Range: 0.01--2.00 Hz
Adjust the depth of modulation. Range: 0--99
Adjust the modulation delay. Range: 0--200
Adjust the number of modulation repeats. Range: 0--99
Adjust the effect return level: 0~99
Adjust the amount of pitch shift. Range: -24--0--+24
* +/-12 is one octave. +/-24 is two octaves.
Make fine adjustments to the amount of pitch shift. Range: -50--0--+50
* +50 is a semitone sharp. -50 is a semitone flat.
Select the processing method. Range: 1--3
Mixer Functions (VF80EX)
51