Vertical rooftop installation
Fitting roof hooks for plain tile roofs
4.
Fitting mounting rails
Turn the tee bolts 90° for all installation steps.
(cont.)
1. Mark the position of the roof hooks in
2.
accordance with the dimensions
shown in the illustration on pages 6
and 8.
2. Remove tiles from the roof at the
hook contact points.
3. Hook the roof hooks onto the battens
3.
and position and align on top of the
tile below.
4. Secure the roof hooks to the bat-
tens.
5. Cover the roof; trim tiles to suit with
an angle grinder; trim approx.
30 mm off the tiles.
11