Table of Contents
Advertisement
Fitting roof hooks or clamping brackets
Fitting roof hooks for plain tile roofs
4.
1. Mark the roof hook position in accord-
2.
ance with the following dimensions:
■ for normal snow loads, see the dia-
■ for higher snow loads, see the
2. Remove tiles from the roof at the
hook contact points.
3.
3. Hook the roof hooks onto the battens
and position and align on top of the
tile below.
4. Secure the roof hooks to the bat-
tens.
5. Cover the roof; trim tiles to suit with
an angle grinder; trim approx.
30 mm off the tiles.
(cont.)
gram on page 6 and 8 or 11
dimensions on page 6 and 9 or 12.
17
Advertisement
Table of Contents
