Cix100-S And Cix100 Processors; Cpu/Memory; Large Scale Integrated (Lsi) Circuits; Memory Protection Battery - Toshiba Strata CIX40 General Description Manual

Strata CIX100-S / CIX100

CIX100-S and CIX100 Processors

CIX100-S and CIX100 Processors
Each system operates with one processor card (ACTU3A-S for CIX100-S, ACTU3A for CIX100)
that installs in a dedicated slot of the Base Cabinet. The processors incorporate the following
hardware features.

CPU/Memory

Either processor card uses a high-speed, 32-bit, RISC processor, Dynamic Random Access
Memory (DRAM) working memory, Static Random Access Memory (SRAM) with lithium battery
for memory back-up, and flash program memory.

Large Scale Integrated (LSI) Circuits

The processors each have LSI circuits that support the following:
• 16 DTMF receiver hardware processor are built into the ACTU3. Five or more DTMF
receivers require appropriate licenses. See
• 16 Busy Tone (BT) detector circuits for Auto Busy Redial (ABR) are built into the ACTU3.
• 64 built-in conference circuits (see
• Built-in, adjustable, digital, volume PAD technology enables audio volume to be adjusted in
eight steps to compensate for conference and/or CO line network losses.

Memory Protection Battery

If commercial AC power is lost or if a system is moved or stored without power, the processor has
an on-board battery that protects data and the customer's programmed configuration from memory
loss. This information will be maintained in a powerless system for at least six years.

Relay Control Interface

An on-board terminal strip provides an interface to a normally open relay contact which can be
programmed to control a Night Bell or door lock or to mute BGM during an external page.

External Page Interface

A 600 ohm RCA jack is built into each processor to interface with a Toshiba External Amplified
Speaker (BESCB) or a customer-supplied page amplifier and speaker(s) for external paging, night
ring over external page, and external BGM applications.

Music-on-hold/Background Music Interface

A 600-ohm RCA jack and volume controls are built into each processor to interface with Music-
on-hold and/or Background Music (BGM) sources (one of the jacks is for future use). With the
CIX100, you can have up to 15 MOH/BGM source interfaces by adding:
• Up to two BIOU circuit cards, each provides three MOH/BGM input sources
• An RSTU circuit card that provides up to eight MOH/BGM input sources

Secure Digital Memory

Each processor has an on-board SD memory card slot. A SD flash memory card can be inserted
into the slot to backup and restore customer program data. It also makes it easy to upload operating
system data for software upgrades and is used for maintenance functions (see
Finding and Diagnostics" on page 151
20
"CIX License Control" on page
Table 14 on page 40 for more information).
for more details).
5.
"System Fault
Strata CIX General Description 12/07