Gvph - Integrated Voice Mail; Feature Compatibility - Toshiba Strata CIX40 General Description Manual

GVPH – Integrated Voice Mail
With the release of Strata CIX40, Toshiba is also introducing a plug and play voice mail circuit
card (GVPH1A) specifically for the Strata CIX40 cabinet. It plugs into a dedicated cabinet slot and
requires no additional hardware to provide its full set of features.
The CIX40 is pre-programmed to match all related voice mail programming in the GVPH Voice
Mail system. This includes station numbers, mailboxes, voice mail hunt groups, voice mail station
IDs and many other items which are listed in the CIX40 installation documentation. The pre-
programmed data is set when the processor is initialized even if the expansion cards or GVPH1A
Voice Mail system is not installed prior to system initialization.
It provides comprehensive Auto Attendant/Voice Mail capabilities, including the following:
• 4-Voice Ports (default) and 6 or 8 ports with LIC-2 GVPH license.
• 40 hours voice storage or up to 10,000 total messages.
• 360 mailboxes.
• Voice Mail Call Monitor – answering machine like operation to monitor and optionally pick-up
a call when someone is leaving a voice message.
• Voice Mail LCD Feature Prompting with Soft Key Operation (English and Spanish).
• Call Record – enables the user to record live calls.
• Installs in a dedicated CIX40 cabinet slot with SMDI integration built-in on backplane – no
serial port or other interface hardware is needed for interface or for its full set of features.
• Built-in remote maintenance modem.
• Administration requires the GVPH UADMIN2 Administration Software.
This is a new version of Stratagy UADMIN2 exclusively for the GVPH1A.
It also includes a new software version program update and prompt update capability for
remote maintenance.
• The Backup and Restore function stores Names, Greetings, Mail box numbers, and all other
database parameters. It does not back up/restore user messages.
• Pre-programmed with default mail boxes that match CIX40 default stations numbers, adding
simplicity to any installation.
To program additional features beyond the default settings, refer to Strata CIX40 Voice Processing
Programming Manual and UADMIN2 software.

Feature Compatibility

The Strata CIX40 uses the same Release 5.10 software as Strata CTX100, CIX200 and CTX670
systems, so functionality and features are the same between them, with some exceptions that are
listed below.
The Strata CIX40 does not support the following capabilities:
• T1 and PRI digital trunk interfaces.
• DID, Ground start and Tie line analog trunk interfaces (supports Loop start with Caller ID).
• Dialed Number Identification Service (DNIS).
• Zone Page Interface.
• Analog Station: Caller ID, message waiting lamp control and off-premise stations
Strata CIX General Description 12/07
Strata CIX40
GVPH – Integrated Voice Mail
11