Toll Restriction Override By System Speed Dial; Traveling Class Of Service; Unrestricted Call Transfer To Directory Numbers; Voice First Or Tone Signaling - Toshiba Strata DK14 General Description Manual

Toll Restriction Override by System Speed Dial

System Speed Dial numbers can be programmed to override Toll Restriction. When employees
need to access a toll number that falls into a restricted area/office code for work purposes, an
employer can assign the particular toll number as a System Speed Dial number. After overriding
Toll Restriction with system Speed Dial, the caller can be blocked from or allowed to dial
additional digits. Dialing long distance provider access codes (10XXX and 101XXX) is not
allowed, except when entered via a System Speed Dial number or LCR.

Traveling Class of Service

The normal Toll Restriction class of a station can be temporarily changed to another class. Each of
the Toll Restriction classes can be assigned a four-digit code.
If one of these codes is entered at any station, the station assumes the class associated with the
code for the next dialed number. Then the station reverts back to its normal Toll Restriction class
for subsequent calls. Traveling Class codes can be added, deleted, or changed by users from
stations selected in programming.
Traveling Class codes will not appear on the SMDR reports. Verified account codes, which can
also change Toll Restriction Class of Service, do print out on SMDR reports.

Unrestricted Call Transfer to Directory Numbers

Any CO, Tie or DID line or internal call can be transferred to any station [DN]. A station does not
need a specific CO line's appearance in order to transfer or answer the call.

Voice First or Tone Signaling

The system can be programmed for either Voice First Signaling to [PDNs] or Tone First Signaling
to [PDNs] as the standard method of internal [PDN] call signaling.
Tone Signaling is the commonly-used telephone ring when a call comes in. Tone Signaling better
ensures privacy. With Tone Signaling, the called telephone receives a one-second ring tone every
three seconds.
With Voice First Signaling, station users will hear a tone burst followed by the caller's voice over
their telephone speaker when called by another station user. Voice First allows handsfree talkback
from the called telephone on internal and private network Tie line calls.
When [PhDNs] are called, they always ring Tone first. Callers can always select the alternative
method immediately after dialing a station number by dialing a

Voice Mail Integration

The system can be configured with a Toshiba Stratagy, Stratagy DK or VP (Voice Processing) or a
customer-supplied voice mail messaging system. The following features are available with many
of the systems.
Automated Attendant
Many voice mail systems offer AA as part of their overall feature package.
ANI/DNIS Routing to Voice Mailbox
Each DNIS number or all ANI numbers can be assigned to route directly to a voice mailbox
independent of telephone user voice mailboxes. Routing ANI/DNIS calls directly to a voice
mailbox can be set for all calls or just calls during a particular system mode (Day, Day2, or Night).
This feature is available with in-band VM integration only, not with SMDI.
Strata DK General Description 5/99

.
Features
System Features
85