Making connections
The following example shows connections with an SS-CDR200.
Precautions before making connections
Before making connections, read the operation manuals of the other equipment carefully and connect each one
•
correctly.
Turn OFF (or put in standby) the power of this unit and all other devices before connecting them.
•
Connect all the devices to the same power supply line. When using a power strip, for example, use a thick cable with a
•
high current capacity to minimize variation in the power voltage.
TASCAM RC-20
Direct Play Remote
(Sold separately)
Mixer,
Mixer,
recorder,
recorder,
ampli er, etc.
ampli er, etc.
(SS-CDR200/
SS-R200 only)
TASCAM RC-3F
Foot Switch
(Sold separately)
Mixer,
Digital mixer,
recorder,
digital recorder,
ampli er, etc.
digital ampli er
(SS-CDR200/
SS-R200 only)
3 − Preparations
Computer
External controller
RS-232C port
(RC-SS20, etc.)
(COM port, etc.)
(SS-CDR200/SS-R200only)
(SS-CDR200/SS-R200 only)
TASCAM SS-CDR200/SS-R200/SS-R100
Headphones
TASCAM RC-SS2
Remote Control Unit
(Supplied)
23