Boot Device Priority; Hard Disk Drives; Removable Drives - Supermicro Supero X6DAL-B2 User Manual

Wait for 'F1' If Error
Select Enable to activate the function of Wait for F1 if Error. The options
are Enabled and Disabled.
Hit 'DEL' Message Display
Select Enabled to display Setup Message when the user hits the DEL key.
The options are Enabled and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled
and Disabled.
Quiet Boot-Progress Bar
Select Enabled to display a graphic representation to show the progress of
POST when the option of Quiet Boot is enabled first.
Enabled and Disabled.

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot
Device.
The settings are "1st Floppy Drive", "CD ROM", "HDD", and "Disabled." The
default settings are:
· 1st boot device –1st Floppy Drive
· 2nd boot device – CD ROM
· 3rd boot device – HDD
· 4th boot device – MBA V7.6.3 (Slot 1)
· 5th boot device – MBA V7.6.3 (Slot 2)

Hard Disk Drives

This feature allows the user to specify the Boot sequence from available
Hard Drives.
1st Drive/2nd Drive
Specify the boot sequence for 1st Hard Drive. The options are HDD and
Disabled.

Removable Drives

This feature allows the user to specify the Boot sequence from available
Removable Drives.
4-21
Chapter 4: AMI BIOS
The options are