Boot Device Priority - Supermicro H8DSP-8 User Manual

H8DSP-8/H8DSP-i User's Manual
Add-On ROM Display Mode
This setting controls the display of add-on ROM (read-only memory) messages.
Select "Force BIOS" to allow the computer system to force a third party BIOS to
display during system boot. Select "Keep Current" to allow the computer system
to display the BIOS information during system boot.
Boot up Num-Lock
Set this to "On" to allow the Number Lock setting to be modifi ed during boot up.
The options are On and Off.
PS/2 Mouse Support
This setting is to specify PS/2 mouse support. The options are Auto, Enabled
and Disabled.
Wait for 'F1' If Error
Enable to activate the Wait for F1 if Error function. The options are Enabled
and Disabled.
Hit 'DEL' Message Display
Enable to display the message telling the user to hit the DEL key to enter the
setup utility. The options are Enabled and Disabled.
Interrupt 19 Capture
Enable to allow ROMs to trap Interrupt 19. The options are Enabled and Dis-
abled.

Boot Device Priority

This feature allows the user to prioritize the sequence for the Boot Device with the
devices installed in the system. The default settings (with generic names) are:
· 1st Boot Device – Removeable drive (e.g. fl oppy drive)
· 2nd Boot Device – CD/DVD
· 3rd Boot Device – Hard drive
· 4th Boot Device – LAN
4-14