Boot Device Priority - Supermicro X6DVL-iG2 User Manual

X6DVL-INF/X6DVL-iG2 User's Manual
Boot up Num-Lock
Set this value to allow the Number Lock setting to be modified during boot
up. The default setting is On. The options are On and Off.
PS/2 Mouse Support
Set this value to allow the PS/2 mouse support to be modified. The options
are Auto, Enabled and Disabled.
Wait for 'F1' If Error
Select Enable to activate the function of Wait for F1 if Error. The options
are Enabled and Disabled.
Hit 'DEL' Message Display
Select Enabled to display Setup Message when the user hits the DEL key.
The options are Enabled and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled
and Disabled.
Quiet Boot Progress Bar
Enable this function to allow the system to display a graphic bar to show
the progress of POST if the item-Quiet Boot (above) has been enabled. The
options are: Enable and Disabled.

Boot Device Priority

This feature allows the user to specify the sequence of priority for the Boot
Device.
The settings are 1st Floppy Drive, CD ROM, HDD, and Disabled. The
default settings are:
· 1st boot device –1st Floppy Drive
· 2nd boot device – CD ROM
· 3rd boot device – HDD
4-18