Mps Configuration - Supermicro Supero X6DAL-B2 User Manual

X6DAL-B2/X6DAL-TB2 User's Manual
Memory Buffer Event Logging
This setting allows you to enable or disable Memory Buffer Event logging.
The options are Enabled or Disabled.
PCI Error Logging
This setting allows you to enable or disable PCI Error logging. The options
are Enabled or Disabled.

MPS Configuration

This section allows the user to configure the multi-processor table.
MPS Revision
This feature allows the user to select MPS Revision. The options are 1.1
or 1.4.
PCI Express Configuration
This section allows the user to configure PCI Express slots.
Active State Power Management
Select Enabled to activate the function of power management for signal
transactions between PCI Express L0 and L1 Link. The options are Enabled
and Disabled.
I/O Expander Mode
This feature allows the user to set the IO Expand Mode for Hot Plug sup-
port. The options are PCA9555, Two PCA9554, One PCA9554 (Low), One
PCA9554 (High),
PCA9554A (High).
PCI Express Port4 (Slot 6)
This feature allows the user to configure the PCI Express slot. The options
are Enabled and Disabled.
PCI Express Compliance Mode
Select Enabled to enable MCH to activate PCI Express Compliance Mode.
The options are Disabled and Enabled.
Spread Spectrum
If Enabled, the AMI BIOS will detect and attempt to reduce the
Electromagnetic Interference caused by the components. The options are
Enabled and Disabled.
Two PCA9554A, One PCA9554A (Low), and One
4-16