Onboard Indicators; Glan Leds; Sata Led Header - Supermicro Supero X6DAL-B2 User Manual

2-7

Onboard Indicators

GLAN LEDs

The Gigabit Ethernet LAN ports (lo-
cated beside the COM Port2) have
two LEDs. The yellow LED indi-
cates activity while the other LED
may be green, orange or off to in-
dicate the speed of the connec-
tion. See the table at right for the
functions associated with the sec-
ond LED.

SATA LED Header

A Serial ATA LED header is lo-
cated at JSLED. See the table on
the right for speaker pin defini-
tions. Please refer to Table 1 for
the X6DAL-TB2 board and Table 2
for the X6DAL-B2 board.
GLAN Ports
ATX PWR
DS3
DS1
P W 2
P W
Fault
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
DIMM 3B
DIMM 3A
P W 3
Spkr
J F 2
P W 1
8-pin
ESB6300
Hance
Rapids
Marvell SATA
Enable
JBT1
M-SATA0-3
JL1
Table 1-SATA LED Pin Definitions
(JSLED) (*For the X6DAL-TB2 Only)
Pin#
1
2
3
4
5
6
7
Table 2 -SATA LED Pin Definitions
Pin#
6
7
SATA LED
USB2/3
2-23
Chapter 2: Installation
Left
(Back Panel View)
G-bit LAN Left LED
Indicator
LED
Color Definition
Off 10 Mbps
(*Also:Off No Connection)
Green 100 Mbps
Orange 1 Gbps
1 Gb LAN Right LED
Indicator(Activity LED)
LED Definition
Color
Amber Blinking
10Mbps/
100Mbps/1Gbps
Definition
Marvell SATA HD0 Active LED
Marvell SATA HD1 Active LED
Marvell SATA HD2 Active LED
Marvell SATA HD3 Active LED
All Marvell SATA Ports Active LED
Hance Rapid's SATA Active LED
Hance Rapid's SATA Active LED
(JSLED)
(*For the X6DAL-B2 Only)
Definition
Hance Rapid's SATA Active LED
Hance Rapid's SATA Active LED
Right