Power Configuration - Supermicro Supero X6DAL-B2 User Manual

Power Configuration

This feature allows the user to configure PnP settings.
Power Button Instant Off
If set to Enabled, the system will shut down immediately once the power
button is pressed. If Disabled, the system will shut down when the
power button is continually pressed for more than 4 seconds. The
options are Enabled and Disabled.
Restore on AC Power Loss
This setting allows you to choose how the system will react when
power returns after an unexpected loss of power. The
Power Off, Power On and Last State.
Watch Dog Timer
This setting is used to enable or disabled the Watch Dog Timer function. It
must be used in conjunction with the WD jumper (see Chapter 2 for details).
The options are Enabled and Disabled.
Event Log Configuration
Highlight this item and press <Enter> to view the contents of the event log.
View Event Log
This feature allows the user to view all unread events.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Logs
This setting will clear all event logs when set to "OK". The options are
"OK" and "Cancel".
ECC Event Log
This setting allows you to enable or disable ECC Event logging. The options
are Enabled or Disabled.
Hub Interface Event Logging
This setting allows you to enable or disable Hub Interface Event logging.
The options are Enabled or Disabled.
System Bus Event Logging
This setting allows you to enable or disable System Bus Event logging. The
options are Enabled or Disabled.
4-15
Chapter 4: AMI BIOS
options are