Table of Contents
Advertisement
X6DAL-B2/X6DAL-TB2 User's Manual
PCI/PnP Configuration
This feature allows the user to set PCI/PnP configurations for the following
items:
Plug & Play OS
Select Yes to allow the OS to configure Plug & Play devices. (*This is not
required for system boot if you system has an OS that supports Plug &
Play.) Select No to allow the AMIBIOS to configure all devices in the sys-
tem.
PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. Select 32 to
set the PCI latency to 32 PCI clock cycles. Select 64 to set the PCI latency
to 64 PCI clock cycles. Select 96 to set the PCI latency to 96 PCI clock
cycles. Select 128 to set the PCI latency to 128 PCI clock cycles. Select 160
to set the PCI latency to 160 PCI clock cycles. Select 192 to set the PCI
latency to 192 PCI clock cycles. Select 224 to set the PCI latency to 224 PCI
clock cycles. Select 248 to set the PCI latency to 248 PCI clock cycles.
Allocate IRQ to PCI VGA
Set this value to allow or restrict the system from giving the VGA adapter
card an interrupt address. The options are Yes and No.
4-10
Advertisement
Table of Contents
