Table of Contents
Advertisement
Electrical Installation
The AC inverter drive requires a clean power
supply free from voltage spikes and surges. A
voltage monitor should be used to check
incoming power. The customer's local power
company may provide such a monitor.
WARNING
This machine must be installed, adjusted,
and serviced by qualified electrical
maintenance personnel familiar with the
construction and operation of this type of
machinery. They must also be familiar with
the potential hazards involved. If this
warning is not observed, personal injury or
equipment damage resulting in voiding the
warranty may result.
DANGER
When controlling the AC inverter drive with
a parameter unit, the machine's computer
and its safety features are bypassed. This
would allow the basket to rotate at high
speeds with the door open. When using a
parameter unit to control the AC inverter
drive, a large sign should be placed on the
front of the machine warning people of the
imminent danger.
F232048
Never touch terminals or components of
the AC inverter drive unless power is
disconnected and the "CHARGE" indicator
LED is off. The AC inverter drive retains
potentially deadly voltage for some time
after the power is disconnected. There are
no user-serviceable parts inside the
AC inverter drive. Tampering with the drive
will void the warranty.
Dangerous voltages are present in the
electrical control box(es) and at the motor
terminals. Only qualified personnel familiar
with electrical test procedures, test
SW004
equipment, and safety precautions should
attempt adjustments and troubleshooting.
Disconnect power from the machine before
removing the control box cover, and before
attempting any service procedures.
SW003
Installation
WARNING
WARNING
SW009
SW005
2–21
Advertisement
Table of Contents
