AMX IRLIB Instruction Manual page 29

Figure 22
Load DCU/IRS Data Dialog
Box
Note
The custom file will not ap-
pear in the DCU/IRS listing of
data files. Only files with an IR
extension are listed.
Note
The custom file retains the
function information but not
the labels that are assigned
by the manufacturers..
Figure 23
Comparison example using
Ctrl-T
IRLIB Infrared Library Management Program
The Choose selection box (Error! Reference source not found.) opens. The selec-
3.
tion highlights the last loaded IR function file used.
4. Use the Ctrl-T key combination to select or "tag" the Hand Control files from the
current directory. A check mark ( ) appears next to the selected files. Mark as
many files as you want to compare in this manner. View more files by using the
Page Up and Page Down keys. These files are used for comparing selected files
to the loaded custom file. IRLIBX compares the tagged files against the hand con-
trol functions you copied to the custom file and fills in the function labels once it
has a match from another compared file. Figure 23 shows an example of how the
files appear after they have been selected with the Ctrl-T.
Move the selection bar to the custom file (displayed with a S) and press ENTER
5.
to select it.
Application and Use 25