Table of Contents
Advertisement
Figure 24
Identical Function NOT
FOUND Message
Figure 25
Custom file function operation
information
Note
This sample page shows that
some function information has
been while other hasn't. You
must compare enough files so
that all of the function posi-
tions show a function label.
26
Application and Use
•
If there is no match for a function operation in the custom file, IRLIBX briefly
displays an "Identical Function NOT FOUND" message during the search
(Figure 24).
•
It is important to reference the Hand Control file names used for creating
custom files because IRLIBX cannot display the function labels if the proper
matches are not found.
Scroll up the DCU/IRS menu to the Modify selection and press ENTER.
6.
The DCU Function description column displays function labels for those opera-
7.
tions that IRLIBX was able to match from the selected files.
•
If the function labels were found then they are displayed. If the function la-
bels are not found from the list of selected files, the function position dis-
plays UNKNOWN (Figure 25).
•
You must repeat steps 1 through 6 until you select a group of files that con-
tain function information similar to that found in your custom file. The pre-
viously selected files remain selected.
8.
Press ESC once your custom file displays function labels for its custom functions.
This action temporary stores the file.
IRLIB Infrared Library Management Program
Advertisement
Table of Contents
