F3-Dcu/Irs - AMX IRLIB Instruction Manual

Infrared library management program

Table of Contents

Figure 9

DCU/IRS Menu

Figure 10

Modify option window for the

DCU/IRS menu

IRLIB Infrared Library Management Program

Use the up and down arrows to select a function and use the edit options to

revise the arrangement of the list..

•

Prints a list of the functions for the currently selected Hand Control.

F3—DCU/IRS

Use the F3 key to access operations such as modify, print, load, program, memory,

and verify (Figure 9). Functions under this menu may be used to make selected

arrangements of previously stored Hand Control function lists. Your selected list can

then be programmed into any Panja IR devices. The list you make can include all the

functions or any subsets of the function lists of selected controllers. This procedure is

described in the Application and Use section.

•

Displays a window with a three-part table including the library of

Modify

Hand Controls and the functions of the currently selected Hand Control. The

arrangement of the MODIFY window is illustrated in Figure 10.

This area is where the

function list will be con-

structed.

The current library of HC

files will be listed in this

area.

IRLIB Menus and Options

Functions of the

currently selected

hand controls will

be listed here.

Table of Contents