Power Up Page - AMX AXT-CP Instruction Manual

Figure 107
Power Up page list
Note
Select ** NONE ** or **
PREVIOUS ** to set the touch
panel to start up with the last
active page.
Color Passive-Matrix LCD Touch Panels
If you try to open a password-protected page, the keypad appears and you must
enter the correct password to open the new page. Refer to Password Page Flips in the
Editor Bar subsection to set the attributes for password protection.
CLEAR Clears the keypad number.
ENTER Sets the page password number, closes the keypad, and returns to
the Protected Setup page.

Power up page

Press the POWER UP PAGE button to open the Power Up page list ( Figure 107).
ADJUST ATTRIBUTES TO DESIRED LEVELS
DEVICE
* * NONE * *
EDITOR
128
* * PREVIOUS *
MAIN PAGE
SETUP PAGE
PASSWORD
PASSWORD
AUTO
POWER UP
ASSIGN
PAGE
BOTH
MOUSE
MODE
LCD TIMEOUT
BRIGHTNESS
4
Select a page to designate the first page to open when you power up the touch panel.
Move the highlight bar to a page name, ** NONE **, or ** PREVIOUS ** using the up
and down buttons. Press ENTER to set the Power Up page.
Up and down arrows
ENTER Sets the Power Up page and returns to the Protected Setup page.
EXIT
*
SERIAL
MASTER
PAGE
TRACKING
ENTER
BAUD
POWER UP
38.4
MESSAGE
Moves the highlight bar up and down.
Touch Panel Program Reference 65