Auto Assign; Mouse - AMX AXT-CP Instruction Manual

Figure 102
AUTO ASSIGN buttons
Figure 103
Mouse Options page
Note
You can still control the touch
panel with your finger when
mouse control is active.
62 Touch Panel Program Reference

Auto assign

Press the AUTO ASSIGN button to assign channel code numbers for new buttons.
Channel code numbers are used by the touch panel and AXCESS Control System to
keep track of operations you assign to each button. Auto Assign is on when the
button background is black with white text, and off when the button background is
white with black text ( Figure 102).
AUTO
ASSIGN
On

Mouse

Press the MOUSE button to open the Mouse Options page shown in Figure 103.
SET MOUSE ATTRIBUTES
MOUSE
MICROSOFT
MOUSE
BORDER
COLOR
The RS-232 port on the touch panel is set to 1200 baud when you activate the
MOUSE button. The RS-232 port defaults to the baud rate setting on the Protected
Setup page when you deactivate the MOUSE button.
AUTO
ASSIGN
Off
EXIT
SPEED
5
LOGITECH
MOUSE
FILL
COLOR
Color Passive-Matrix LCD Touch Panels