Table of Contents
Advertisement
Figure 86
BEEP button
Figure 87
LCD TIMER button
Figure 88
SERIAL NUMBER, AXlink, and
vX.XX button examples
Color Passive-Matrix LCD Touch Panels
BEEP
1
Set the beep value to 0 to turn the beep off. Press the up and down buttons to set the
beep time. The minimum beep time setting is 0 and the maximum is 10.
LCD timer
The LCD TIMER button ( Figure 87) sets the length of time the panel can be inactive
before screen -saver mode is activated .
LCD TIMER
5 m i n
When the touch panel goes into screen-saver mode, the LCD light turns off. With a
setting of five, the panel goes into screen-saver mode if there is no activity for 5
minutes. Press the up and down buttons to change the time that the timer screen
stays on when there is no panel activity. The minimum time setting is 1 minute and
maximum is 150 minutes.
Serial number, AXlink, and vX.XX
The SERIAL NUMBER, AXlink, and vX.XX buttons shown in Figure 88 are non-
active (display only) buttons.
SERIAL NUMBER
AXlink
915 - XXXX
The SERIAL NUMBER button shows the serial number AMX assigns to the touch
panel. The AXlink button is an AXCESS communication indicator that blinks once
every second when the AXCESS Control System is connected to the touch panel. The
vX.XX button shows the current ROM software version installed in the touch panel.
vX.XX
Touch Panel Program Reference
53
Advertisement
Table of Contents
