Table of Contents
Advertisement
Figure 119
PAGE TRACKING buttons
Figure 120
BAUD button
72
Touch Panel Program Reference
The message reference to MASTER refers to the AXCESS Control System, and TP
refers to touch panel.
YES
Changes the program port from the master AXCESS Control System to
the touch panel.
NO
Cancels the serial master mode setting.
Page tracking
Press the PAGE TRACKING button to set the page tracking option. When the page
tracking button is enabled, the touch panel sends active page data back to the
AXCESS Control System. The data can be used to control pages in another touch
panel. Page tracking is on when the button background is black with white text
(Figure 119), and off when the background is white with black text.
PAGE
TRACKING
TRACKING
On
Baud
The BAUD button (Figure 120) sets the data communication speed for the touch
panel.
BAUD
38.4
Make sure to match the baud transmission rate for the AXCESS Control System, PC,
or other external RS-232 device. The baud rates are 300; 600; 1,200; 2,400; 4,800; 9,600;
19,200; and 38,400.
Up and down buttons
Editor Bar
Press the EDITOR button in the Protected Setup page to activate the Editor Bar. The
Protected Setup page remains open until you press EXIT. Then, the Editor Bar
PAGE
Off
Increases and decreases the baud rate.
Color Passive-Matrix LCD Touch Panels
Advertisement
Table of Contents
