To Set The Parity - Agilent Technologies 33120A User Manual

Chapter 4 Remote Interface Reference

To set the parity

To set the parity
You can select the parity for
configured for 8 data bits with no parity when shipped from the factory.
See also "Parity Selection," on page 116.
Shift
1 Turn on the menu.
Menu On/Off
< <
2 Move across to the
<
<
3 Move down a level and then across to the
¿
4 Move down to the "
¿
Use the left/right arrow keys to see the parity choices. Choose from one
of the following: None: 8 Bits , Odd: 7 Bits, or Even: 7 bits. When you
set parity, you are indirectly setting the number of data bits.
Enter 5 Save the change and turn off the menu.
The parity selection is stored in non-volatile memory, and does not
change when power has been off or after a remote interface reset.
220
A: MOD MENU
I /O MENU
E: I/O MENU
4: PARITY
PARAMETER
NONE: 8 BITS
-232 operation. The function generator is
RS
choice on this level.
PARITY
" level to select the parity.
choice.