Query Error - Agilent Technologies Infiniium 90000 Series Programmer's Manual

Query Error

An error number in the range- 400 to- 499 indicates that the output queue
control of the instrument has detected a problem with the message
exchange protocol. An occurrence of any error in this class should cause
the query error bit (bit 2) in the event status register to be set. An
occurrence of an error also means one of the following is true:
• An attempt is being made to read data from the output queue when no
• Data in the output queue has been lost.
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
output is either present or pending.
37
Error Messages
1013