Agilent Technologies Infiniium 90000 Series Programmer's Manual page 1017

Table 30 Error Messages (continued)
-374 The requested self test log file
could not be found
-375 Attenuator relay actuation counts
can only be modified during
factory service
-400 Query error
-410 Query INTERRUPTED
-420 Query UNTERMINATED
-430 Query DEADLOCKED
-440 Query UNTERMINATED after
indefinite response
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
This is the generic query error.
37
Error Messages
1017