Agilent Technologies Infiniium 90000 Series Programmer's Manual page 1117

}
/* Query for a number result.
* --------------------------------------------------------------- */
void do_query_number(query)
char *query;
{
}
/* Query for numbers result.
* --------------------------------------------------------------- */
void do_query_numbers(query)
char *query;
{
}
/* Query for an IEEE definite-length block result.
* --------------------------------------------------------------- */
int do_query_ieeeblock(query)
char *query;
{
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
strcat(message, "\n");
iprintf(id, message);
iscanf(id, "%t\n", str_result);
check_instrument_errors();
char message[80];
strcpy(message, query);
strcat(message, "\n");
iprintf(id, message);
iscanf(id, "%lf", &num_result);
check_instrument_errors();
char message[80];
strcpy(message, query);
strcat(message, "\n");
iprintf(id, message);
iscanf(id, "%,10lf\n", dbl_results);
check_instrument_errors();
char message[80];
int data_length;
strcpy(message, query);
strcat(message, "\n");
iprintf(id, message);
data_length = IEEEBLOCK_SPACE;
iscanf(id, "%#b", &data_length, ieeeblock_data);
if (data_length == IEEEBLOCK_SPACE )
{
38
Sample Programs
1117