37
Error Messages
Device- or Oscilloscope-Specific Error
An error number in the range of - 300 to - 399 or +1 to +32767 indicates
that the instrument has detected an error caused by an oscilloscope
operation that did not properly complete. This may be due to an abnormal
hardware or firmware condition. For example, this error may be generated
by a self- test response error, or a full error queue. The occurrence of any
error in this class causes the oscilloscope- specific error bit (bit 3) in the
event status register to be set.
1012
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference