30
Serial Data Equalization Commands
:SPRocessing:DFEQualizer:SOURce
Command
:SPRocessing:FFEQualizer:SOURce {CHANnel<N> | FUNCtion<F> | WMEMory<N>
The :DFEQualizer:SOURce command sets the source for the Decision
Feedback Equalization.
Setting the source to EQUalized means the Feed- Forward Equalized (FFE)
waveform is used as the DFE source.
<N>
CHANnel<N> is an integer, 1- 4.
WMEMory<N> is an integer, 1- 4.
<F>
FUNCtion<F> is an integer, 1- 16.
Example
This example sets the DFE source to Channel 1.
myScope.WriteString ":SPRocessing:DFEQualizer:SOURce Channel1"
Query
:SPRocessing:DFEQualizer:SOURce?
The :SPRocessing:DFEQualizer:SOURce? query returns the DFE source.
776
| EQUalized}
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference