To Save A Display Image; To Recall A Display Image - HP 8590 E-Series User Manual

TRACE C.
5. Enter the register number that the trace was saved under and then press [ENTER]. The
recalled trace is placed in view mode.

To Save a Display Image

you want the state saved. A prefix can be one to seven characters long.
If you do not specify a prefix, the display image will be saved with a file name consisting of
CARD selects the memory card as the mass storage device.
3. Press DISPLAY + CARD . REGISTER # and PREFIX= are displayed on the spectrum analyzer
display.
4. Use the numeric keypad to enter a register number and then press [ENTER].

To Recall a Display Image

to be retrieved.
4. Press LOAD FILE.
Note
The intensity of some screen items may differ if the window configuration of
the current spectrum analyzer state does not match the recalled display image.
This will not affect the ability to copy the screen.
Display image data can also be recalled by specifying the prefix and the register number:
3. Enter the register number that the state was saved under, and then press (ENTER].
5-14 Using Analyzer Features