Inserting The Memory Card - HP 8590 E-Series User Manual

6. If accurate self-calibration is needed temporarily in a different environment, use
CAL FREQ t AMPTD
used until the spectrum analyzer is turned off or until
Memory Card Insertion and Battery Replacement
The memory card reader is available for the HP 859OL, HP 8592L, and HP 8594L as Option 003.
Use the following information to ensure that the memory card is inserted correctly. Improper
insertion causes error messages to occur, but generally does not damage the card or instrument.
Care must be taken, however, not to force the card into place. The cards are easy to insert
when installed properly.
1. Locate the arrow printed on the card's label.
2. Insert the card with its arrow matching the raised arrow on the bezel around the
card-insertion slot. See Figure 2-7.
3. Press the card into the slot. When correctly inserted, about 19 mm (0.75 in) of the card is
exposed from the slot.
CAL STORE
, but do not press
Figure 2-7. Inserting the Memory Card
. The temporary correction factors will be
CAL FETCH
is pressed.
Getting Started