HP 8590 E-Series User Manual page 277

SYNC
changes the rear panel MONITOR output between normal internal monitor
horizontal and vertical synchronization constants or the NTSC video compatible
NRM NTSC
format. In the NTSC mode the monitor output is compatible with NTSC video
cassette recorders. In the normal mode the synchronization constants can be
changed from the factory default settings by using CRT HORZ POSITION and
CRT VERT POSITION softkeys. If the user has not changed the constants the
default settings will be used.
The display will be compressed slightly when using the NTSC format, instead
of the normal format. The NTSC format has less vertical resolution than the
spectrum analyzer display. The top and bottom of the spectrum analyzer
display are compressed slightly so that all of the information can be fit into the
vertical resolution available with the NTSC format.
Front-Panel Key Access: (j-j
SYNC
changes the rear panel MONITOR output between normal internal monitor
horizontal and vertical synchronization constants or the PAL video compatible
NRM PAL
format. In the PAL mode the monitor output is compatible with PAL video
cassette recorders. In the normal mode the synchronization constants can be
changed from the factory default settings by using CRT HORZ POSITION and
CRT VERT POSITION softkeys. If the user has not changed the constants the
default settings will be used.
The display will be compressed slightly when using the PAL format, instead
of the normal format. The PAL format has less vertical resolution than
the spectrum analyzer display. The top of the spectrum analyzer display is
compressed slightly so that all of the information can be fit into the vertical
resolution available with the PAL format.
Front-Panel Key Access: CCONFIG)
Option 105 only. 0ption 101 is recommended.
T WINDOW
changes the resolution bandwidth in the time domain window of the gate
RES BW
utility.
Front-Panel Key Access: C-1
T WINDOW
changes the sweep time in the time domain window of the gate utility and
SWP TIME
re-scales the gate markers.
Front-Panel Key Access: Cm]
7-84 Key Descriptions