Advertisement
The fax machine allows you to send and receive messages (SMS),
even if you are connected to a switchboard, and to save up to
40 messages, of which: 5 written and sent messages, 5 written and not
yet sent messages and 30 received messages.
In addition to this, it is possible to send messages in "FAX" format and
by electronic mail ("E-MAIL").
For details on the SMS service, please contact the man-
ager of the telephone network to which you are connected.
T
O ACTIVATE THE SMS SERVICE
To activate the SMS service you must set, both for send-
ing and for receiving message, the numbers indicated
by the "SMS Service Centre" and provided by your
network operator. After having activated this service,
you can send and receive messages (SMS) every time
you wish:
All SMS service functions are to be activated with-
out the document in the ADF.
The display shows:
/
Until the display shows:
The display shows:
The display shows:
The display shows:
-
Directly on the numeric keypad, type the number of the
SMS transmission service given to you by the "Service
Centre" of your network manager. For example: 4211.
To confirm your setting. The display shows:
-
Directly on the numeric keypad, type the number of the
SMS reception service given to you by the "Service Cen-
tre" of your network manager and then press the
key to confirm the setting.
To return the fax machine to the initial stand-by mode.
T
O WRITE AND SEND A MESSAGE
The display shows:
The display shows:
Write the text of the message (max. 640 characters) by
pressing the keys on which the desired number, character
or symbol is written. See table below:
Key 1 = @ space 1 . / -
Key 2 = a b c å ä æ à ç 2 Γ
Key 3 = d e f è È é 3 ∆ Φ
Key 4 = g h i ì 4
Key 5 = j k l 5 Λ
Key 6 = m n o ñ ö Ø ò 6
Key 7 = p q r s ß 7 Π Σ
Key 8 = t u v ü ù 8
Key 9 = w x y z 9
Key * = * space ~ . / \ , ; _ : ' " ? !
Key 0 = space + & / % 0 € £ ¥ $ ¿ § ¡ Θ Ξ Ψ Ω
Key # = # & % + $ < = > @ ( ) ^ | [ ]
To change from upper case letters to lower case letters and
vice versa.
/
To scroll the cursor on alphanumeric characters already
keyed in or to leave a blank space.
To delete a character on the left hand side of the cursor. It
deletes all the text if kept pressed.
While the text is being entered, the display will show, in its
top right-hand corner, a number (from 1 to 4) that increases
every 160 characters. This number is used to indicate
how many characters have been entered and how many
more can still be entered. For example: if you have typed
a text consisting of 220 characters, the number 2 appears.
The display shows:
To confirm your setting. The display shows:
The display shows:
-
Dial the correspondent's number in one of the following
ways: either from numeric keypad or with one-touch dial-
ling keys and speed dialling codes (see "To set one-touch
and speed dialling", chapter "Basic transmission and
reception operations").
S
MS SERVICE
(
)
SMS
1
Advertisement
