Advertisement
T
(
O SAVE A MESSAGE
SENDING IT
The display shows:
The display shows:
Write the text of the message (Max. 640 characters) as
described in "To write and send a message (SMS)".
To confirm your setting. The display shows:
/
Until the display shows:
To confirm your setting. The message "SAVED" appears
on display for a few seconds. The message will be saved
on the list of written messages "SMS WRITTEN".
To return the fax machine to the initial stand-by mode.
If the message "MEMORY FULL", "DELETE SMS" appears
on display and the fax machine does not allow you to write the
text of your message, this means that:
- the sent message memory is full
or
- the draft message memory is full
or
- both memories are full.
At this point, delete at least one of the messages from either or
both of the memories (depending on the case). See "To
delete a message (SMS)" later in the manual.
T
/
O EDIT
SEND AGAIN A MESSAGE
Look at the list of messages sent or written (not sent yet) if
you want to find a message that you wish to edit and/or
send again.
F
ROM THE LIST OF MESSAGES SENT
The display shows:
/
Until the following message appears on display:
"XX" is the number that appears in the upper right-hand
side corner and it indicates the total number of messages
sent (max. 5). It is useful if you want to know how many
messages you have sent and, therefore, how many you
can still send.
To confirm the setting. The display shows:
)
SMS
WITHOUT
(
)
SMS
To confirm your setting. The display shows from left to right:
the reference number which identifies the messages present
on the list of messages sent (from the newest to the oldest),
the correspondent's telephone number, the text of the mes-
sage or part of it, and the date and time.
Press |/} once to show all the message-related data and
/
the text of the message on the fax machine. To stop the text
on display, press |/} again.
At this point you can press
again or press ‚/ to find on the above-mentioned list
another message that you wish to edit and/or send again
and then press
.
In both cases the display shows on the upper line:
and on the bottom line, the message text that you have just
selected.
At this point, by resuming the procedure described in "To
write and send a message (SMS)", from the step in
which the display shows: "TEXT SMS", you can:
- edit the contents of the message and send it back to the
same recipient or another recipient.
- send the same message back to the same recipint or
another recipient.
- store the edited message without sending it.
If the message "MEMORY FULL", "DELETE SMS" appears
on display and the fax machine does not allow you to write the
text of your message, this means that:
- the sent message memory is full
or
- the draft message memory is full
or
- both memories are full.
At this point, delete at least one of the messages from either or
both of the memories (depending on the case). See "To
delete a message (SMS)" later in the manual.
F
ROM THE LIST OF MESSAGES WRITTEN AND SAVED
The display shows:
/
Until the following message appears on display:
"XX" is the number that appears in the upper right-hand
side corner and it indicates the total number of messages
written and saved (max. 5). It is useful if you want to know
how many messages you have saved and, therefore, how
many you can still save.
To confirm the setting. The display shows:
From this point on, follow the procedure described in "To
edit/send again a message (SMS) - From the list of
messages sent".
to edit and/or send
3
Advertisement
