Installation integrated "i" Dishwashers
Drill the fixing holes to a depth of
about 10 mm, using a 2.5 mm drill bit.
Secure the fixing bracket to the door
front using the flat-head screws sup-
plied.
Take off the templates.
Keep the templates in case the dish-
washer is ever fitted with a new door
front.
Hang the door front into the slits in
the machine door outer panel.
Installing integrated "i" Dishwashers
Once the door front is correctly posi-
tioned:
Open the dishwasher door slightly.
Adjust the door front for the height
on one side and lightly screw in a
T20 Torx screw on this side.
Adjust the door front height on the
other side and also lightly screw in a
T20 Torx screw on this side.
Shut the dishwasher door.
Check the door front for correct align-
ment.
If necessary unscrew and readjust.
Open the dishwasher door.
Tighten all the Torx screws on the
sides.
Plug the openings for the fixing
screws using the plastic stoppers
provided.
71